The hottest proe wildfire 2030 common experience a

2022-10-23
  • Detail

Pro/e wildfire 2.0, 3.0 common experience and common problems

experience of doing reverse with proe

reverse is actually a method of using measured points as reference and restoring things. It is necessary to use positive design ideas to figure out the ideas of the original designer. I generally use the tool scanning method (with high-density options) to form a curve for the points measured in three coordinates, and then use the method of two projections or adjust the feature line in the shape, and open the curvature comb when making lines, Zoom in 100 times! Take a look at the places with large curvature changes where fillets can be used. If there is a flat or obvious trend, it is recommended to use mixed scanning to make a better surface

it's really annoying to open the default browser to connect to the network every time you start pro/e,

set: Web in the wildfire configuration file_ browser_ Home: blank can start the wildfire without connecting to the network, haha

pro/e before doing reverse, it's better to use other reverse software such as gemagicstudioimagesurface to deal with it.

the wildfire start-up screen is always annoying when it changes.

change the various images of pro/e or the industry chain cooperation is not close. Wildfire turns its favorite pictures into GIF format and then copy them to

textresourcecom_ F (this is the startup screen, or others, there are many. Just open it with Photoshop and have a look)

remember to back up the original com before overwriting_ f.

if it is a student version of PROE, the file name is STD_ f.

someone asked me that he used the Chinese version of wildfire, but he couldn't stand the font It's too small and ugly,

he wants to change it to a font like the 2001 Version Don't know how to change it

add a sentence in config: menu_ Font arial

open the appearance of the window system display attribute, and change the text font of the window from 8 to 9. Must be OK

alternative opening of the file

drag the file directly to the window of the rag to open it. Throw the file directly into the main window of the rag, and the file can be opened

tips: when assembling or opening parts; First click the component containing the part, click browse, and then click the small part you want in the browse window. This part will appear in the browse window alone. You can directly think that you can divide the carton enterprise into three categories

set config to turn pro/e into Bilingual laidan

menu_ Translate yes, no

when running the non English version of pro/en, specify the language displayed on the laidan,

Yes - use the local language no- use English,

both - use both the local language and English (Bilingual laidan),

set new_ RELATION_ UI and new_ PARAMETER_ If the UI is yes, you will find that the interface for modifying the relationship and parameter is much better than the original one.

convert the engineering drawing to DWG and import it into AutoCAD. You will find that the size has changed to inches. Where is it set

once and for all, first of all, your working environment is metric system, and then set config

in the pro/e engineering drawing. In the actual tension machine calibration process, the number of measurements is 3

drawing_ units = mm

default_ draw_ Scale =1:1

in this way, it is absolutely the correct size when transferred to CAD! OK

a little experience of making a curve through points

making a curve through points generally needs to be tangent to the curve or surface. Sometimes it needs to be tangent to the curvature. Pay attention to the judgment of the positive and negative directions. You will find that the positive direction is the direction from the starting point to the end point, and the direction from the starting point to the end point is the positive direction of the tangent direction. There is also the curvature tangent. First, you should define the curve and curve as tangent, Redefine the tangent of curve and curve curvature

if you want to make a smooth surface, always pay attention to:

for example, when many circles and straight lines are deep drawn or rotated, the drawn line should be used at the end of sketching:/convert the spline, and the two projections should also be treated as above before making the line! You will find that the surface does not have a polyline. When using variable pitch scanning, general scanning or hybrid scanning to control the draft angle, when extracting the boundary of the surface, first compound or copy the curve (using approximation), and then scan with the compound curve, so the surface does not have a polyline

layer building: right click at the midpoint of the model tree/tree layer/in the blank of the layer, select the new layer, and increase its mechanical properties through appropriate heat treatment process to build a new layer.

draw a dotted line: after drawing a line, select the line and press cttl+g to convert the line type. Under sketching, it cannot be changed to double dotted line, but can only be modified after drawing. Select the center line first, press the right button, select attribute, and select: simulated line type under attribute, Just click the application

the variable pitch scanning of wildfire becomes very powerful. It can completely replace the previous scanning and partial hybrid scanning. Like the previous scanning of spatial curves, hybrid scanning is generally used, and the same cross-sections are drawn at both ends (generally, the curve system does not recognize the selected scanning curve). Now it's good, use the variable pitch scanning to change, select the curve chain, and then use the default one to scan out

there is no need to make a ring array of temporary datum

there are two methods:

1:copy one (after rotating around the axis) uses the angle as the driving array! Generally, as you forget to make a temporary datum, you use the most land, especially the surface array

2: when sketching, delete a datum plane in the reference, take the axis as the reference, and mark the distance from the center of the column section to the axis and the angle from the center to the undeleted datum! When array, select the angle as the driving array

3: if the section is constructed with a construction circle and a centerline, the marker column is the same as the above, and can only be arrayed 180 degrees at most! Remember

to make the DWG or DXF file output of the drawing free of garbled code

set DXF_ out_ stroke_ Text is yes

Copyright © 2011 JIN SHI