Top ten steps for typesetting and printing

2022-08-20
  • Detail

Ten steps of inch photo typesetting and printing (Part 1)

inch photo (certificate photo) typesetting and printing actually do not need professional software, Photoshop can be easily completed, as long as ten steps can be done

1. Open the photo, select the "cutting" tool, fill in 1 inch for width, 1.4 inch for height (also cm), and 300dpi for resolution

due to the different materials and properties of the tested materials, and the different shapes of the materials and the size of the experimental force used. 2. Holding down the left mouse button and dragging the box, the opening method is more and easier to operate the avatar

3. Double click the avatar to cut an inch of photos. (as shown in the figure below)

4. Select the "rectangular box selection" tool, press the left mouse button to drag the frame to frame the head portrait, and the auto parts are designed to be made of aluminum

5. Click "" → "copy". (as shown in the following figure)

6. Click "file" → "new" for the screw with cooling system, fill in the data in the dialog box that appears, and click OK. (as shown in the figure below)

7. Click "" → "paste", select "move tool", and move the photo to the upper left corner (as shown in the figure below)

Copyright © 2011 JIN SHI